I have a 2009 cobalt LS without cruise. Is it possible to put cruise on from a junk car??? If I chan

I have a 2009 cobalt LS without cruise. Is it possible to put cruise on from a junk car??? If I change the steering wheel controls are the wires thier in every car or would I need the whole harness???
Check the BCM connector for pin position 61. If there is a grey wire in there, the car should be able to have cruise with just the new switches and a reflash. Otherwise, you'll need to manually run a wire from the clock spring to the BCM.
Thank you for the info. I will look. Also I took the air bag off and saw that there were only 3 wires coming from the info and reset set switch that are on my cobalt and the one in the junk yard has 5 or 6 wires that go to the clock spring...is it possible I may be able to just change the switch and plug the new one into the clock spring (looks as though it may just plug in)
Thank you for the info. I will look. Also I took the air bag off and saw that there were only 3 wires coming from the info and reset set switch that are on my cobalt and the one in the junk yard has 5 or 6 wires that go to the clock spring...is it possible I may be able to just change disney world cheap tickets the switch and plug the new one into the clock spring (looks as though it may just plug in)
Check the BCM connector for pin position 61. If there is a grey wire in there, disney world cheap tickets the car should be able to have cruise with just the new switches and a reflash. Otherwise, you'll need to manually run a wire from the clock spring to the BCM.
I did this in my 07 LT, as long as pin 61 has a grey wire in it all u need is the new steering wheel control bezel w/ harness to clip into the clock spring. then pay the dealer to reflash for cruise control